Fire protection two-bus electrostatic surge protection

Fire protection two-wire bus is a dual-wire communication and power supply technology that realizes 24V/28V DC power supply and digital signal transmission through the same pair of wires. It is widely used in the networking communication between fire alarm controllers, detectors, modules and other devices.
· PowerBus Protocol: It adopts low-voltage DC carrier +TDMA time division multiple access technology to superimpose and transmit power and communication signals.
· Long-distance coverage: The theoretical communication distance can reach up to 1,500 meters, supporting topological structures such as star and bus types.
· Low-voltage power supply: 24V/28V DC power supply, with low power consumption and high safety of the equipment.
· Modbus compatibility: The application layer protocol supports Modbus RTU and can be directly connected to the fire alarm controller.
Leiditech Electronics has developed a protection solution for electrostatic surges on fire protection two-bus systems
In view of the characteristics of co-line power supply and communication in the two-bus system, the thunderbolt adopts the GDT ceramic gas discharge tube 3R090-5S for rapid conduction (nanosecond-level response) to discharge the inrush current. The PTC self-resetting fuse SMD1812P110TF-33 suppresses inrush currents (such as overcurrent caused by bus short circuits and equipment failures) and avoids thermal failure. The rear stage adopts SMC 24 (24V bus) nanosecond-level response to ensure signal integrity, meeting IEC61000-4-2 and ISO10605-2 grades 4, with contact discharge at 30kV and air discharge at 30kV.
|
类别 |
型号 |
描述 |
电流 |
通道数 |
封装 |
应用 |
|
ESD |
SMC24 |
24V,2路双向,50PF |
9A |
2 |
SOT-23 |
用于PowerBus 24V总线防静电 |
|
ESD |
SD24C |
24V,1路双向,25PF |
9A |
1 |
SOD-323 |
用于PowerBus 24V总线防静电 |
|
ESD |
SD30CW |
30V,1路双向,30PF |
9A |
1 |
SOD-323 |
用于PowerBus 28V总线防静电 |
|
GDT |
3R090-5S |
90V±20% 双向 |
5KA |
2 |
3R直径5MM |
用于PowerBus 28V总线防浪涌 |
|
PTC |
SMD1812P110TF-33 |
33V,1.1A,0.25Ω |
1.1A |
1 |
SMD1812 |
用于Powerbus总线防过流 |
Leiditech, also known as Leiditech Electronics, is committed to becoming a leading brand in electromagnetic compatibility solutions and component supply, offering products such as ESD, TVS, TSS, GDT, MOV, MOSFET, Zener, and inductors. Leiditech has an experienced R&D team that can provide personalized customization services based on customer needs and offer the best solutions to customers.
Leave a Reply
- EMC protection design for access control security devices: the four external interfaces that deserve
- From power to antenna: EMC protection design solution for video doorbells
- Solving lightning and ESD hazards in industrial sites: LVDT pressure transmitter protection design
- Micro PLC crashes, resets, and communication packet loss? EMC is the root cause.
- How can humanoid-robot DC power supply systems cope with frequent transient load changes?
