Security Monitoring Static Surge Protection Scheme

In today's society, security monitoring systems have become an important force in safeguarding public safety. Whether on bustling city streets or peaceful rural paths, surveillance cameras are like silent guardians, constantly guarding our homes.
However, in the face of the challenges posed by nature, how can we ensure that security monitoring systems are not only "visible", but also "clear" and "long-lasting"? Based on years of work experience, Shanghai Lei Mao engineers suggest the following: starting from the early stages of design, EMC forward design should be carried out. In order to cope with challenges such as lightning strikes and electrostatic discharge, corresponding TVS electrostatic surge protection devices should be configured on the power and signal lines to ensure that the security monitoring system can be seen for a long time.
The security system diagram drawn by Shanghai Lei Mao engineer is as follows:

From the above diagram, it can be seen that in this complex control system, we need to implement electrostatic surge protection for each module and interface, so that the entire system can achieve airtight protection. Engineers are divided into two parts for sharing: 1. Sensor and interface protection, and 2. Power interface protection.
1、Shanghai Leiditech suggests protecting sensors and interfaces in security monitoring,
This section lists the specific ESD protection device part numbers that need to be placed on the interface. If there are any interface protections not mentioned in this table, please contact the Shanghai EMC team for consultation.
|
品牌 |
型号 |
描述 |
电流 |
封装 |
应用 |
|
leiditech雷卯 |
SLVU2.8-4 |
2.8V,4路双向,2 PF ±30kV(air), ±30kV(contact) |
30A |
SOP-08 |
适用于千兆网防雷保护 |
|
leiditech雷卯 |
GDT 3R090-5S |
90V 双向 1.5PF |
5KA |
三极直径5mm |
|
|
leiditech雷卯 |
LCC05DT3 |
5V,2路双向,1.2PF ±30kV(air), ±30kV(contact) |
12A |
SOT-23 |
适用于音频接口静电保护 |
|
leiditech雷卯 |
ULC0511CDN30 |
5V,1路双向,0.22PF ±30kV(air), ±30kV(contact) |
4.5A |
DFN1006 |
适用于麦克风接口静电保护 |
|
leiditech雷卯 |
LC0504F |
5V,5路单向,0.8PF ±15kV(air), ±8kV(contact) |
5A |
SOT-363 |
适用于SD卡静电保护 |
|
leiditech雷卯 |
ESDA33CT30 |
3.3V,1路双向,10.3PF |
9A |
SOD-523 |
适用于传感器3V接口、按键静电的静电保护 |
|
leiditech雷卯 |
ESDA05CP30 |
5V,1路双向,15PF |
8A |
DFN1006 |
适用于传感器5V接口、普通IO口的静电保护 |
2. Shanghai Leiditech provides protection for the power interface of security monitoring systems
Proper surge protection for power interfaces is as important as filtering, sterilizing, and disinfecting the water in a reservoir at its source. Only with proper protection for power interfaces can the backend circuits operate safely.
The recommended part numbers for the power interface are as follows. The specific selection of TVS power and voltage depends on the circuit situation. If you need consultation, you can contact EMC.

2. Shanghai Leiditech recommends MOSFET for security monitoring
For the power control and driving components MOSFET used in security, engineers have also listed the advantageous components.
For more interface protection schemes, please follow the official account of Shanghai Leimao or contact EMC.
Shanghai Leimao specializes in the research and sales of ESD, TVS,TSS,GDT,MOV,MOSFET,Zener, Inductors and other products. Lei Mao is committed to providing customers with high-quality products to protect circuits from electrostatic interference and voltage fluctuations. Lei Mao has an experienced R&D team that can provide personalized customized services according to customer needs and provide customers with the highest quality solutions.
Leave a Reply
- PoE power supply methods and EMC protection in the DC power supply system of intelligent logistics r
- EMC protection design for access control security devices: the four external interfaces that deserve
- From power to antenna: EMC protection design solution for video doorbells
- Solving lightning and ESD hazards in industrial sites: LVDT pressure transmitter protection design
- Micro PLC crashes, resets, and communication packet loss? EMC is the root cause.
