AZ176S-04F domestic alternative for LMULC1545CLV
Many customers have already chosen Lebao's LMULC1545CLV to replace Amazing's ESD diode AZ176S-04F. In the selection of replacement products, parameter matching and supply stability are of crucial importance. Shanghai Lebao recommends this model to customers, as its parameters are extremely close to those of AZ176S-04F and the supply is stable. Currently, a large number of customers have adopted these two replacements.
The parameter comparison table of AZ176S-04F and Lebao LMULC1545CLV is as follows:
|
Parameter(参数) |
LMULC1545CLV (Leiditech) |
AZ176S-04F (Amazing) |
|
|
|
|
|
VRWM(最大反向工作电压) |
1.5V |
1.5V |
|
VBR(击穿电压) |
3.5V |
5.0V |
|
Bi/Ui (双向/单向) |
Uni-directional |
Uni-directional |
|
IR(漏电流) |
0.2μA |
1.0μA |
|
IPP(Max)(最大脉冲峰值电流) |
6A |
4A |
|
Package(封装) |
DFN2510-10 |
DFN2510-10 |
|
Vcmax@Ipp |
4V@6A |
4.3V@4A |
|
Cj (结电容) |
0.4pF |
0.29pF |
|
ESD(Air) (空气静电保护能力) |
±25KV |
±15KV |
|
ESD(Contact)(接触静电保护能力) |
±15KV |
±14KV |
To determine whether an ESD diode can be used as a substitute, the following points should be considered:
Is VRWM close?
2. Is the anti-static performance close to...?
3. Is VBR close?
4. Is IPP close?
5. Are CJ and I close?
Application:
LMULC1545CLV is mainly used for electrostatic protection of high-speed differential signal lines, such as HDMI 1.3, HDMI 1.4, HDMI 2.0, USB 2.0, USB 3.0, USB 3.1, Type C, SATA and eSATA, Thunderbolt, DisplayPort, V-by-On, etc. high-speed data interfaces. It is packaged as DFN2510-10.
The package pins are as follows.
The LMULC1545CLV package and internal circuitry are the same as those of the AZ176S-04F. Moreover, the parameters such as VRWM, VBR, IPP, CJ, ESD (air, contact) are almost identical. Therefore, it can completely replace the AZ176S-04F.
PCB wire connection:

PCB布线:
One LMULC1545CLV chip can be used for 4 channels of high-speed differential ESD protection. The PCB wiring is used to connect each line to (pin 1 to 8, pin 2 to pin 7, pin 3 to pin 6, pin 4 to pin 5). For example, Pin 1 enters and exits Pin 8. The PCB layout connects pin 1 and pin 8 together. The same is true for the lines connected at pins 2, 3, and 4. Please note that there is no internal connection between pins 1 to 8. An external connection line must be used for the connection. The intermediate connection of GDN line should use a large ground instead of two independent grounds.。

Shanghai Leiditech offers multiple models that can be used in combination with Amazing to serve as a P2P alternative. The following table presents a partial list of ESD diodes that Lebao has compiled for substitution.。
