Inductor
Introduction to Inductor
Inductor, also called a coil, choke, or reactor, is a passive two-terminal electrical component that stores energy in a magnetic field when electric current flows through it. An inductor typically consists of an insulated wire wound into a coil around a core.
The basic functions of inductance include filtering, oscillation, delay, notch, etc., which is visually called "through DC, resisting AC".
Part Number |
Dimension (mm)
|
Inductance (µH)
|
Test Freq.
|
DCR (mΩ)
|
Isat Typical (A)
|
Isat Mx (A)
|
Irms Typical (A)
|
Irms Mx(A)
|
Z(Ω)
|
RDC(Ω)Max.
|
IDC(mA)
|
Rated Voltage(Vdc)
|
Withstanding Voltage(Vdc)
|
Insulation Resistance(MΩ)(min)
|
Tolerance(±%)
|
Test Freq.(MHz)
|
Inner Diagram | Data sheet |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LDW11T-670M | ||||||||||||||||||
LDW11T-900M | ||||||||||||||||||
LDW11T-121M | ||||||||||||||||||
LDW21T-670M | ||||||||||||||||||
LDW21T-900M | ||||||||||||||||||
LDW21T-121M | ||||||||||||||||||
LDW21T-181M | ||||||||||||||||||
LDW21T-221M | ||||||||||||||||||
LDW21T-261M | ||||||||||||||||||
LDW21T-371M | ||||||||||||||||||
LDW21T-501M | ||||||||||||||||||
LDW21T-671M | ||||||||||||||||||
LDW21T-901M | ||||||||||||||||||
LDW31T-900M | ||||||||||||||||||
LDW31T-121M | ||||||||||||||||||
LDW31T-221M | ||||||||||||||||||
LDW31T-261M | ||||||||||||||||||
LDW31T-601M | ||||||||||||||||||
LDW31T-102M | ||||||||||||||||||
LDW31T-222M | ||||||||||||||||||
LDWI11T-600Y | ||||||||||||||||||
LDWI11T-900Y | ||||||||||||||||||
LDWI21T-500Y | ||||||||||||||||||
LDWI21T-670Y | ||||||||||||||||||
LDWI21T-900Y | ||||||||||||||||||
LDWI21T-121Y | ||||||||||||||||||
LNR252012-220M | 2.5*2.0*1.2 | 22 | 1MHZ,0.2V | 810 | 0.55 | 0.44 | 0.53 | 0.424 | ||||||||||
LNR303010-2R2M | 3.0*3.0*1.0 | 2.2 | 1MHZ,0.2V | 100 | 1.5 | 1.2 | 1.4 | 1.12 | ||||||||||
LNR303010-4R7M | 3.0*3.0*1.0 | 4.7 | 1MHZ,0.2V | 205 | 1 | 0.8 | 0.95 | 0.76 | ||||||||||
LNR303010-6R8M | 3.0*3.0*1.0 | 6.8 | 1MHZ,0.2V | 310 | 0.87 | 0.696 | 0.85 | 0.68 |